Last updated: · Reviewed by the lescobillonline.com editorial team
What is the LESCO reference number?
The reference number is the permanent identifier LESCO assigns to a metered connection. It stays the same for the life of the meter, even if ownership changes or the meter is replaced, which is why every online bill lookup — on the official PITC portal or on lescobillonline.com — asks for it first.
It is always 14 digits long and is printed in the top-left block of your printed bill, usually directly under the words REFERENCE NO. Some older bills print it in groups (for example 24 15 12345678 U), but you should enter it online as a continuous string of 14 digits with no spaces, dashes or letters.
Because the number encodes your circle, division and subdivision, LESCO staff can identify exactly which office and feeder serves you from the reference number alone. That is why they ask for it before registering any complaint.
Digit-by-digit breakdown
The structure below is the pattern used across WAPDA distribution companies. The exact grouping can vary slightly by subdivision, but the logic is consistent.
| Position | Meaning | Example |
|---|---|---|
| Digits 1–2 | Circle / region code within LESCO | 24 |
| Digits 3–5 | Division and subdivision office code | 151 |
| Digits 6–7 | Feeder or book number used by the meter reader | 22 |
| Digits 8–13 | Your account serial within that book | 004317 |
| Digit 14 | Check digit used to validate the whole number | 9 |
Why the check digit matters
The last digit is calculated from the preceding thirteen. If you mistype a single digit, the check fails and the portal returns “record not found” rather than showing someone else’s bill. So a failed lookup almost always means a typing error, not a missing bill.
Reference number vs consumer ID vs meter number
This distinction causes most failed lookups. If your search returns nothing, confirm you are not typing the meter serial from the meter box.
- Reference number — 14 digits, printed top-left, used for every online bill check and payment.
- Consumer ID / account number — an internal LESCO account label; on most bills it is the same string as the reference number.
- Meter number — the serial stamped on the meter body itself. It changes when the meter is replaced and cannot be used to look up a bill.
- Customer ID used in bank apps — banks ask for the reference number, so enter the same 14 digits there.
How to find your reference number
- Check an old bill. Any bill from the last several years carries the same number — it never changes for the same connection.
- Check a payment receipt. Bank slips, ATM receipts, JazzCash and Easypaisa histories all record the 14-digit reference you paid against.
- Ask a neighbour on the same book. Meter readers work book by book; a neighbour’s number shares your first seven digits and helps staff locate yours faster.
- Visit the subdivision office. Take your CNIC and the address of the premises to your LESCO subdivision office and request the reference number.
- Call the helpline. Dial 118 and give the address and CNIC of the registered consumer.
Using the reference number online
Once you have the number, a bill check takes seconds. Open the bill check page, type the 14 digits, and the current month’s units, payable amount, due date and after-due-date amount appear together with the billing history.
The same number is used to download the duplicate bill PDF for payment, to register for SMS alerts, and to file a billing complaint. Keep it saved in your phone contacts or notes so you never have to hunt for a paper bill again.
Helpful tips
- Save the 14 digits as a contact in your phone named “LESCO ref” so it is searchable.
- Photograph the top block of one paper bill; it contains the reference number, tariff code and sanctioned load.
- When paying through a bank app, verify the consumer name shown after entering the reference before confirming.
Warnings & common mistakes
- Never share your reference number with someone offering to “reduce” your bill — billing corrections only happen through LESCO offices.
- Do not add letters or spaces when entering the number online; the portal expects exactly 14 digits.
- A reference number from a different DISCO (MEPCO, IESCO, FESCO) will not resolve on a LESCO lookup.
Frequently asked questions
Can I check my LESCO bill without a reference number?
No. LESCO does not support name-, address- or meter-number-based search. The 14-digit reference number is the only lookup key, so you must recover it from an old bill, a payment receipt or your subdivision office.
Does the reference number change when the meter is replaced?
No. The reference number belongs to the connection, not the physical meter. A replaced meter keeps the same reference number, though the meter serial printed on the bill will change.
Is the consumer number the same as the reference number?
On LESCO bills the terms are used interchangeably; both refer to the 14-digit identifier printed at the top-left of the bill.
Why does the portal say record not found?
Usually a typo. Re-check each digit against the printed bill, remove spaces and dashes, and confirm you are not entering the meter serial. If it still fails, the connection may be newly energised and not yet billed.
Can two properties share one reference number?
No. Each metered connection has a unique number. Sub-meters installed by a landlord are private and are not billed by LESCO.
Check your LESCO bill now
Enter your 14-digit reference number to view the current amount, due date and full billing history.
Open LESCO bill check